Bosch PMF 350 CES Original Instructions Manual page 18

OBJ_BUCH-2652-002.book Page 18 Wednesday, March 16, 2016 9:27 AM
18 | English
Accessory
Profile sander
BIM plunge cut saw
blade, wood and
metal
HCS plunge cut saw
blade, wood
Bi-metal plunge
cut saw blade,
hardwood
TC plunge cut saw
blade, metal
BIM plunge cut saw
blade, wood and
metal
HM-Riff segment
saw blade
Diamond-Riff seg-
ment saw blade
HM-Riff delta plate Mortar,
1 609 92A 2T2 | (16.3.16)
Material Application
Wood, Convenient, efficient sanding of profiles up to a diameter of
Pipes/Profile, 55 mm;
Paint, Red sanding sheets for sanding wood, pipes/profiles,
Varnishes, varnishes, fillers and metal
Filler,
Metal
Softwood, Smaller separating and plunge cuts;
Soft plastics, example: cutting an opening for sockets, flush cutting a
Plasterboard, copper pipe, plunge cuts in plasterboard
Thin-walled aluminium
Filigree adjustment work in wood;
and non-ferrous metal
example: sawing openings for locks and fittings
profiles,
Thin sheet metals,
Non-hardened nails and
screws
Wooden materials, Separating and deep plunge cuts; also for sawing close to
Soft plastics edges, in corners and hard to reach areas;
example: narrow plunge cut in solid wood for installing a
ventilation grid
Hardwood, Plunge cuts in laminated panels or hardwood;
Laminated panels example: installing skylights
Metal, Plunge cuts in severely abrasive materials or metal;
Severely abrasive mate- example: cutting kitchen front covers, easy cutting through
rials, hardened screws, nails and stainless steel
Fibreglass,
Plasterboard,
Cement-bonded fibre
boards
Softwood, Plunge cuts in laminated panels or hardwood;
Hardwood, example: shortening door frames, cutting openings for a
Veneered panels, shelf
Plastic-laminated panels,
Non-hardened nails and
screws
Cement joints, Cutting and separating close to edges, in corners or hard to
Soft wall tiles, reach areas;
Glass fibre reinforced example: removing grouting joints between wall tiles for
plastics, repair work, cutting openings in tiles, gypsum boards or
Porous concrete plastic
Cement joints, Precise routing and cutting of tile/joint material, epoxy
Soft wall tiles, resins and glass fibre reinforced plastics;
Epoxy resin, example: making smaller cutouts in soft wall tiles and
Glass fibre reinforced routing openings in glass fibre reinforced plastic
plastics
Rasping and sanding on hard surfaces;
Concrete residues, example: removing mortar or tile adhesive (e.g. when re-
Wood, placing damaged tiles), removing carpet adhesive residues
Abrasive materials
Bosch Power Tools