Nikon D850 Menu Manual page 98

A
During Shooting
During shooting, Q will flash and the
time-lapse recording indicator will be
displayed in the control panel. The time
remaining (in hours and minutes) appears in
the shutter-speed display immediately
before each frame is recorded. At other times, the time remaining can
be viewed by pressing the shutter-release button halfway. Regardless
of the option selected for Custom Setting c2 (Standby timer, 0 118),
the standby timer will not expire during shooting.
To view current time-lapse movie settings or
end shooting (0 97), press the G button
between shots. The data displayed in the
time-lapse movie menu while shooting is in
progress include exposure smoothing, the
interval, and the time remaining. These
settings cannot be changed while shooting
is in progress, nor can pictures be played back or other menu settings
adjusted.
A
Image Review
The K button cannot be used to view pictures while shooting is in
progress, but the current frame will be displayed for a few seconds
after each shot if On is selected for Image review in the playback
menu (0 27). Other playback operations cannot be performed while
the frame is displayed.
A
See Also
For information on the beep that sounds when shooting is complete,
see B > Beep options (0 177).
98 Menu Guide