JVC UX-G500VB Service Manual page 9

3.1.4 Removing the Amp board (See Fig.6)
(1) Disconnect the connector wire from Power board connect-
ed to connector CN640
(2) Disconnect the card wire from Amp board connected to
connector CN520 of the Micom board.
(3) Remove the one screw E attaching the Amp board.
3.1.5 Removing the DVD mechanism (See Fig.7 to 8)
(1) Disconnect the card wire from DVD mechanism connected
to connector CN360 and
(See Fig.7)
(2) Disconnect the connector wire from DVD mechanism con-
nected to connector CN811
Fig.7)
(3) Disconnect the card wire from DVD mechanism connected
to connector CN205 of the Power board. (See Fig.7)
(4) Disconnect the card wire from DVD mechanism connected
to connector CN510 of the Micom board. (See Fig.7)
(5) Remove the two screws F attaching the DVD mechanism.
(See Fig.8)
of the Amp board.
CN361 of the Connection board.
of the Connection board. (See
CN520
Fig.6
CN205 CN361
Fig.7
Fig.8
E
CN640
CN811 CN360 CN510
F
(No.MB674<Rev.003>)1-9