Philips 240P4QPYEB/00 Service Manual page 89

2. Video timing mode (internal firmware support), (for DP INPUT)
Software control functions via OSD / control adjustable functions:
ITEM
1 OSD DEFINITIONS
2 OSD LANGUAGES
3 OSD TREE
4 POWER ON LOGO
5 Audio Selection (Optional)
Horizontal scanning
Sync polarity
Scanning frequency
Vertical scanning
Sync polarity
Scanning frequency
PS : Item 3.4 and 3.5 , as far as possible to be display (another Horizontal and Vertical)
Power input connection
Power cord length
Power cord type
Power management
The monitor must comply with the Microsoft On Now specification, and meet EPA requirements.
60Hz: 480p/720p/1080i/1080p
50Hz: 576p/720p/1080i/1080p
Refer to OSD TREE
Refer to languages table
Attachment files :
Refer to OSD TREE
Stand-alone – On:
Isolate video and audio control
input
Stand-alone – Off:
Integrate video and audio control
input
Mute – On: Turn off audio
Mute – Off: Turn on audio
: Positive or Negative
: 24 – 94 K Hz
: Positive or Negative
: 48 - 85 Hz
: please refer to M3 cable bundle summary file
: 3 leads power cord with protective earth plug.
Meridian 3
Reset -
No: Exit
Yes: Auto adjustment for
displaying timing mode and
recall factory preset
English, French, German,
Spanish, Italian, Russian,
Simplified Chinese,
Portuguese (8)
Power On Logo: Power On
Show up Philips logo 3
seconds
Change to input signal.
This picture is reference only.
The official drawing will send
out by PM.
89