Table of Contents
Advertisement
Section 3 - Software Configuration
Step 3: Internet Connection (Dynamic IP Address)
After selecting the Dynamic IP Address Internet connection method,
the following page will appear.
MAC Address:
Enter the MAC address of the Internet gateway
(plugged into the Internet port of this device).
Clone Button:
If the configuration PC also acts as the Internet
gateway, then click on the Clone Your PC's MAC
Address button to copy the PC's MAC address into
the space provided. If you're not sure, leave the
MAC Address field blank.
Host Name:
Enter the host name used. You may also need to
provide a Host Name. If you do not have or know
this information, please contact your ISP.
Primary DNS
Enter the Primary DNS IP address used.
Address:
Secondary DNS
Enter the Secondary DNS IP address used. This field is normally optional. Only one DNS address is required for a functional
Address:
Internet connection, but using a second DNS address provides more stability.
Click Next to continue.
Advertisement
Table of Contents
