LG U8500 User Manual page 109

1. Additional Setup
- Select "Settings" menu' from "Internet " menu",
Select next menu "Accounts". Open "Options"
menu by pressing Left Soft Key and select "Add"
option.
The following items need to be configured
Account title Settings account name.
Homepage Service URL.
Connection mode Choose from given list of connection
modes. (default is UDP (CO))
Proxy IP address WAP Gateway IP address provided by the
operator. (e.g. 193.254.160.002)
Proxy port Port details are provided by operator,
depending upon
Security Choose
Default value is "Non-secure".
Timeout Linger time setting. (150 seconds as a
default)
Access point Access point setting for the corresponding
service. (More details for adding or
editing new
- Press "Done" key to save any configuration
changes.
"Connection mode".
"Secure" connection if needed,
Access point refer step 3)
3. Access Points
- User can list the available Access Points by selecting
"List" appears on Centre soft menu of "Access
point" parameter from Internet setting value.
- User can add a new Access Point by selecting
"Add New" from "Option" menu.
- Press "Done" key to save any configuration
changes. The details for Access Point
parameters are as follows:
Connection title Access Point profile name.
Bearer Choose the bearer from the list. (Default
is "UMTS/GPRS")
Authentication Choose the authentication from the list.
(Default is "No auth")
Username Information provided by Service Provider.
Password Information provided by Service Provider.
APN APN name to access network. Information
provided by service provider.
Reliability class Choose the Reliability class from the list.
(Default is "Subscribed")
DNS server Choose the DNS server from the list.
(Default is "Automatic")
Traffic class Choose the Traffic Class from the list.
(Default is "Subscribed")
109