Accu-Chek WX3-122 User Manual page 44

Technical Information
8
Specifications
Meter type
Control solution storage conditions
Interfaces
Radio frequency connectivity
Electromagnetic Compatibility – The meter meets the electromagnetic emission requirements as per
EN 61326-2-6. Its electromagnetic emission is thus low. Interference on other electrically-driven
equipment is not anticipated.
Performance Analysis – Refer to the test strip package insert.
Test Principle – Refer to the test strip package insert.
Declaration of Conformity – Roche hereby declares that the Accu-Chek Instant blood glucose meter
conforms with the basic requirements and other relevant regulations of the European Directives
1999/5/EC and 2014/53/EU once solely applicable. The transition period for the European Directive
1999/5/EC ends June 12th 2017. The currently valid conformity declaration may be found at the
following Internet address: http://declarations.accu-chek.com
Communication Protocol – The Accu-Chek Instant blood glucose meter is Continua Certified. Continua
Certified signifies that this product complies with applicable IEEE 11073-10417 standards and that it
has been tested and certified against the 2015 Continua Design Guidelines which include the Blood
Glucose specification for Bluetooth, Bluetooth SIG, Glucose Profile, Version 1.0 and Bluetooth SIG,
Glucose Service, Version 1.0.
42
The Accu-Chek Instant meter is suitable for continuous
operation.
Refer to the control solution package insert.
USB: micro-B connector; Bluetooth; Continua Certified
Continua Certified manager.
Bluetooth low energy technology operating in the frequency
band of 2402 MHz to 2480 MHz with a maximum transmitted
power of 0 dBm (1 mW).
to a
®