Related Manuals for Connectiviot CT-SW01
Summary of Contents for Connectiviot CT-SW01
- Page 1 WIFI Smart Switch User’s Manual Model: CT-SW01...
- Page 2 Smart Switch Device Smart Switch Device Layout ① ② On/Off Switch LED Indicator Technical Information Voltage: 100V-240V Max Current: 5A WiFi: 2.4GHz 802.11.b/g/n Security: Open/WEP/WPA2...
-
Page 3: Installation
Installation Download Smart Switch Application Search and download the Smart Switch application from Android Google Play Store Set Up Smart Switch Device Set Device to Set Up Mode 1. Press and hold power switch while plug it into wall socket. 2. - Page 4 3. Open device set up page by swipe left side of screen to right side and select “+” button. 4. Create new profile for your device. Profile name and WiFi network information is required.
- Page 5 5. After creating profile, select a device you want to configure. After device selection, you can change the device name as you like, and select “SETUP” button to finish the configuration. If you are not able to see the device from the list, please try to set your device to set up mode again.
-
Page 6: Application Features
Application Features Turn Switch On/Off the Smart Switch Device To switch on/off the Smart Switch device, long press the device in application device list view. Schedule to Turn On/Off Smart Switch Device Smart Switch application two method to add schedule to Smart Switch device (Quick Run and Schedule). - Page 7 2. Schedule allow you to add repeated or one-time schedule to Smart Switch device. You can set up the specific time, day, and on/off command to control the Smart Switch device automatically. Real-time Power Usage Monitor Smart Switch application displays Smart Switch device’s power consumption such as live power usage, current, line frequency, voltage, and total usage since it is powered on.
- Page 8 Power Usage Graph Smart Switch application displays Smart Switch device’s power consumption with graph view. You can check the device’s past power usage by hourly, daily, monthly with graph view. Smart Switch Firmware Update When new Smart Switch device firmware is released, update firmware button will be visible on the device view.
- Page 9 Profile Management Application can manage multiple profiles. Each profile represents different or same locations that Smart Plug is placed. When profile is deleted, all the Smart Plug registered to the deleted profile will be removed as well. For add new profile, please see “Configure Device”. Users can set a profile as “Default Profile”...
-
Page 10: Regulatory Information
Adding More Smart Switch Device Application can manage multiple Smart Plug devices. Users can add more devices into single profile or multiple profiles. See more detail about registering new Smart Plug in “Configure Device” section above. Regulatory Information FCC Statement This device complies with part 15 of the FCC Rules. - Page 11 “To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter.”...