Video Output Settings; Language Settings - Pioneer DV-470 Operating Instructions Manual

Initial Settings menu
Setting
MPEG Out

Video Output settings

Setting
TV Screen
(See also Screen sizes
and disc formats on
page 38.)
Component Out
AV Connector Out

Language settings

Setting
Audio Language
Option
MPEG > PCM
MPEG
Option
4:3 (Letter Box)
4:3 (Pan & Scan)
16:9 (Wide)
Interlace
Progressive
Video
S-Video
RGB
Option
English
Languages as displayed
Other Language
What it means
MPEG encoded digital audio is converted to PCM audio for
digital output.
MPEG encoded digital audio is output as is.
What it means
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
Set if you have a widescreen TV.
Set if your TV is not compatible with progressive scan video.
Set if your TV is compatible with progressive scan video (see
your TV's instruction manual for details). See also Switching
the video output to interlace using the front panel controls on
page 11.
Note that progressive scan video is only output from the
component video jacks.
Ordinary (composite) video output, compatible with all TVs.
Almost the same quality as RGB, but can give better results if
you're using a long SACRT cable.
If your TV is compatible, this setting gives the best picture
quality.
What it means
If there is an English soundtrack on the disc then it will be
played.
If there is the language selected on the disc, then it will be
played.
Select to choose a language other than the ones displayed (see
page 40).
07
33
En