Advertisement
TX-396L
I TO SERVICE PERSONNEL
Critical Components Information.
Components having special characteristics are marked
and must be replaced with parts having specifications
equal to those originally installed.
WARNING: CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and /or plastic
(where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency
(and possibly other entities) to cause cancer and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REA-
SON WHATSOEVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose
eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.
I SPECIFICATIONS
I FM SECTION
Tuning Range
50dB Quieting Sensitivity (IHF)
Mono
Stereo (1 kHz 100% MOD)
Usable Sensitivity (DIN)
Mono (S/N 26 dB)
Stereo (S/N 46 dB)
Alternate Channel Selectivity
Selectivity (two signals) 40 kHz Dev. ±300 kHz 70 dB
Signal to Noise Ratio (DIN-Weighted 40 kHz)
Mono
Stereo
Harmonic Distortion 1 kHz
Mono
Stereo
Stereo Separetion 1kHz (40 kHz Dev.)
Frequency Response
20 Hz to 15 kHz
I MW SECTION
Tuning Range
Usable Sensitivity
Signal to Noise Ratio
Harmonic Distortion 1 kHz
I LW SECTION
Tuning Range
Usable Sensitivity
Signal to Noise Ratio
Harmonic Distortion 1 kHz
1
WALL
OUTLET
87.50 to 108.00 MHz
1.55 µV(15.1 dBf)
21 µV(37.7 dBf)
0.9 µV
24 µV
75 dB
70 dB
0.1 %
0.2 %
50 dB
0±0.5 dB
531 to 1611 kHz
200 µV/m
50 dB
0.3 %
153 to 288 kHz
400 µV/m
50 dB
0.3 %
EQUIPMENT
UNDER TEST
INSULATING
TABLE
I AUDIO SECTION
Output Level/Impedance (Fixed)
FM 100 % MOD 1 kHz
MW/LW 30 % MOD 1 kHz
I GENERAL
Power Supply
Power Consumption
Dimensions (W x H x D)
Weight
* Specifications subject to change without notice.
• MODEL COLOR
Black and Gold
• DIMENSIONS
435
AC LEAKAGE
TESTER OR
EQUIVALENT
500 mV/2.2 kΩ
200 mV/2.2 kΩ
AC230V, 50Hz
7 W
435 x 86 x 278mm
3.2 kg
Advertisement
