Sennheiser EZT 3012 Instruction Manual

Induction loop
Hide thumbs Also See for EZT 3012:

Advertisement

Induction loop
EZT 3012
Instruction manual

Advertisement

Table of Contents
loading

Summary of Contents for Sennheiser EZT 3012

  • Page 1 Induction loop EZT 3012 Instruction manual...
  • Page 2: Important Safety Instructions

    Important safety instructions • Please read this instruction manual carefully and completely before using the product. • Make this instruction manual easily accessible to all users at all times. Always include this instruction manual when passing the product on to third parties. •...
  • Page 3: The Ezt 3012 Induction Loop

    The EZT 3012 induction loop The EZT 3012 induction loop is an accessory for Sennheiser infra- red and RF receivers as well as for conference units of a conference system. The EZT 3012 inductively couples the audio signal from the receiver/conference unit to hearing aids.
  • Page 4: Preparing The Ezt 3012 For Use

    Preparing the EZT 3012 for use CAUTION! Danger due to magnetic fields! If you connect the EZT 3012 to devices that are not designed for use with the induction loop, a magnetic field can be generated which could cause dangerous interference with cardiac pacemakers and implanted defibrillators.
  • Page 5 Wearing a receiver Depending on the receiver used, you require a lanyard or a clip (see “Accessories” on page 6) in addition to the EZT 3012 induction loop. ³ ·...
  • Page 6: Putting The Ezt 3012 Into Operation

    Putting the EZT 3012 into operation CAUTION! Hearing damage due to high volumes! Listening at high volume levels for long periods can lead to permanent hearing defects. Before using the receiver or the conference unit, set the volume to a low value.
  • Page 7: Specifications

    Cat. No. Accessory/spare part 528184 Clip 528185 Lanyard Specifications EZT 3012 induction loop Audio connector 3.5 mm stereo jack plug Cable length induction loop 75 cm connection cable 40 cm 28 Ω at 1 kHz...
  • Page 8: Manufacturer Declarations

    Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our web site at www.sennheiser.com or contact your Sennheiser partner. WEEE Declaration Please dispose of this product at the end of its operational lifetime by taking it to your local collection point or recycling centre for such equipment.
  • Page 9 Sennheiser electronic GmbH & Co. KG Printed in China Am Labor 1, 30900 Wedemark, Germany Publ. 04/09 www.sennheiser.com 532880/A01...

Table of Contents