Physical Installation - Pioneer SH-DT510 Operating Instructions Manual

Terminals
S-Video Out
Data Port
RF In
Composite Video Out
Audio Out
(L, R)
RF Out
AC IN
Digital Audio Out
(Optical and Coaxial)
Component Out
(Y/Pb/Pr)
HDMI Out

Physical Installation

There are many ways to connect the Digital High Definition tuner to your TV,
depending on the equipment and connection types you have. However, for
the best video/audio quality, use the best quality HDMI Terminal if available.
Always disconnect the tuner from the power source prior to connecting or
disconnecting.
12
Connects to the S-Video input on your TV or VCR.
For service use only.
Connects the VHF/UHF antenna. This connector
accepts input signals ranging from 51 to 858 MHz.
Connects to the video input on your TV, VCR or DVR.
Connects to the audio input on your TV, VCR,
DVR or stereo system.
Connects to TV or VCR RF input (for video and
mono audio signals).
Connecting to mains supply and plug the receiver
into the main, the power source from 240 Vac, 50 Hz
Connects to the digital (Optical and Coaxial)
audio input on a home theatre surround system.
Connects to the component (Y/Pb/Pr) video input
on your TV set.
Connects to the HDMI input on your TV.
Description