Holiday - Danfoss ECL Comfort 310 Installation Manual

Installation Guide

8.3 Holiday

There is a holiday program for each circuit and a holiday program
for the common controller.
Each holiday program contains one or more schedules. Each
schedule can be set to a start date and an end date. The set period
starts on the start date at 00.00 and stops on end date at 24.00.
Selectable modes are Comfort, Saving, Frost protection or Comfort
7-23 (before 7 and after 23, the mode is scheduled).
How to set your holiday schedule:
Action: Purpose:
Choose 'MENU'
Confirm
Choose the circuit selector at the top
right corner in the display
Confirm
Choose a circuit or 'Common
controller settings'
Heating
DHW
Common controller settings
Confirm
Go to 'Holiday'
Confirm
Choose a schedule
Confirm
Confirm choice of mode selector
Choose mode
. Comfort
· Comfort 7–23
. Saving
· Frost protection
Confirm
Enter the start time first and then the
end time
Confirm
Go to 'Menu'
Confirm
Choose 'Yes' or 'No' in 'Save' . Choose
the next schedule, if required
120 DEN-SMT/DK
ECL Comfort 310, application A367
Examples:
The holiday program in the 'Common controller settings' is valid for
all circuits. The holiday program can also be set individually in the
heating or DHW circuits.
The end date must be at least be one day later than the start date.
VI.LG.R1.02
Danfoss District Energy