To add set of unique prefixes, execute the command with all unique prefixes. The prefixes are
allowed to overlap IPv4 address space.
An IPv4 prefix addition will be blocked, if resource exhaustion is detected anywhere in the system
because of Filter Policies that use this IPv4 address prefix list.
none
Default
ip-prefix — A valid IPv4 address prefix in dotted decimal notation.
Parameters
prefix-length — Length of the entered IP prefix.
7450 ESS OS Router Configuration Guide
0.0.0.0 to 255.255.255.255 (host bit must be 0)
Values
1 — 32
Values
Filter Policies
Page 475