Pioneer VSX-D908TX Operating Instructions Manual page 57

Î
5 S0URCE RECEIVER
MULTI SYSTEM
OPERATION OFF
DVD/LD TV/SAT VCR1 VCR2
MULTI CONTROL
MD/
CD TUNER TV CONT
TAPE1
CLASS MPX BAND DIRECT ACCESS
¶ 7 3 8
- + - +
TUNING STATION
1 ¡ 4 ¢
- +
CHANNEL
2 3
1
4 5 6
7 8 9
+10 0 DISC
RF ATT DISPLAY
TV
TV VOL VOLUME
TV CONTROL
TV FUNC
EFFECT
MENU MUTE
/CH SEL
FUNCTION
ENTER
SIGNAL
SELECT
2/dts
SYSTEM
THX ADVANCED STANDARD
SETUP
7
MPEG
REMOTE
MIDNIGHT DSP STEREO
SETUP
DIGITAL NR
AV PREPROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
VSX-D938TX
Remote Control of Other Components
5
Press the button to be programmed.
The MULTI CONTROL button lights steadily.
• The TV POWER, TV FUNC and TV VOL +/– buttons are only
available for learning when programming TV CONTROL
operations.
6
Point the remote controls at each other and press the
button on the other remote control for the operation
you wish to program .
1 Point the remote controls toward each other.
2 Hold down the button on the other remote control
corresponding to the operation you wish to program. Release
when the MULTI CONTROL button on the receiver's remote
control starts blinking.
(The MULTI CONTROL button blinks to indicate that the
operation has been learned.)
To program additional operations for the current component
Repeat steps 5 and 6.
To program operations for another component
Repeat steps 4 through 6.
7
Press REMOTE SETUP to exit the LEARNING SETUP
mode.
The remote control and TV return to their previous operation
modes.
7 cm
57