Location Data - Nikon D850 User Manual

Location Data

The GP-1/GP-1A GPS unit (available separately) can be
connected to the camera's ten-pin remote terminal (0 296)
using the cable supplied with the GP-1/GP-1A, allowing
information on the camera's current position to be recorded
when photographs are taken and viewed in the playback photo
info display (0 229). Turn the camera off before connecting the
GP-1/ GP-1A; for more information, see the GP-1/GP-1A manual.
❚❚ Setup Menu Options
The Location data item in the setup menu contains the options
listed below.
• Position: The current latitude, longitude, altitude, and
Coordinated Universal Time (UTC).
• External GPS device options > Standby timer: Choose whether or not
the standby timer is enabled when a GPS unit is attached.
Option
Standby timer enabled. The timer expires automatically if
no operations are performed for the period specified in
Custom Setting c2 (Standby timer, 0 263), reducing the
drain on the battery. If a GP-1 or GP-1A unit is connected,
Enable
the unit will remain active for a set period after the timer
expires; to allow the camera time to acquire location data,
the delay is extended by up to one minute after exposure
meters are activated or the camera is turned on.
Standby timer disabled, ensuring uninterrupted recording
Disable
of location data.
• External GPS device options > Set clock from satellite: Select Yes to
synchronize the camera clock with the time reported by the
GPS device.
Description
221