How To Browse The Monitored Signals - ABB ACS550 User Manual

ACS550 User's Manual
Output mode
In the Output mode, you can:
• monitor actual values of up to three
signal at a time
• start, stop, change the direction and switch between local and remote control.
You get to the Output mode by pressing
the bottom.
The display shows the value of one
OPERATING DATA
right. Page
be monitored in the Output mode. The table below
shows how to view them one at a time.

How to browse the monitored signals

Step Action
1. If more than one signals have been selected to be monitored (see page
68), you can browse them in the Output mode.
To browse the signals forward, press key
them backward, press key
signal. The unit is shown on the
68 tells how to select up to three signals to
repeatedly. To browse
repeatedly.
Group 01: OPERATING DATA
until the display shows text OUTPUT at
Group 01:
REM
OUTPUT
REM
OUTPUT
REM
OUTPUT
REM
OUTPUT
65
signals, one
491
.
Hz
FWD
Display
491
.
Hz
FWD
05
A
.
FWD
107
.
%
FWD
Control panels