Pioneer Elite PRO 510HD Operating Instructions Manual page 73

TV/ CBL
DTV /SAT
TV
POWER TV
INPUT
1 2
SPLIT SEARCH
SCREEN
1
MODE ANT
DTV
2
AUDIO
1
3
4
7
4
¢
5
RETURN
CH
MUTING
4
EDIT/ TV/SAT/DVD
LEARN MENU
SOURCE
POWER POWER
6 2
SET/
ENTER
8
FAVORITE CH
7
1 7
RECEIVER
INPUT
POWER
DTV CONTROL BUTTONS
For viewing DTV broadcasts, the SH-D09 digital tuner (sold
separately) is necessary.
The following buttons will not work if a digital tuner has not
been connected.
When the mode switch is set to TV/DTV, the remote control
unit buttons will function as shown below.
• When a digital tuner is installed to the Monitor, press the
DTV button on the remote control unit. The tuner can be
operated using buttons 1 to ~.
Mode switch
VCR DVD
/LD
ON/OFF
DTV
8
3 4
SELECT
SUB CH
FREEZE
9
DISPLAY
2 3
5 6
8 9
CH
0
ENTER
0
CH
VOL
DTV/DVD TOP
-
MENU
DTV/SAT
5
=
GUIDE
3
DTV/(SAT)
~
∞
INFO
VCR REC
3 ¡
VOL VOL
1 SCREEN MODE button
Press to select the SCREEN MODE.
2 DTV AUDIO button
Press to select the audio mode during multiaudio
broadcasts.
3 Direct channel selection buttons
Press the button (or buttons) that corresponds to the
channel that you wish to watch.
4
button
Used in channel selection.
5 CH (channel) +, – button
Press plus (+) or minus (–) to tune in a higher or lower
channel.
6 Select/Set buttons (SET/ENTER, 2, 3, 5, ∞)
2, 3, 5, ∞:
Press the button to select items on the DTV
MENU screen.
SET/ENTER: Press to activate the selected function.
7 FAVORITE CH/Colored (blue, green, red and yellow)
buttons
FAVORITE CH: Used for making FAVORITE CH settings
with the digital tuner.
Blue, Green, Red, Yellow:
Used to make selections from the digital
tuner menu.
8 DTV ON/OFF button
Turns the digital tuner on and off.
9 ANT (antenna selector) button
Used to switch to AIR/CABLE as an input source when
"Both" is selected in the input source setting mode.
0 CH RETURN (channel return) button
Press to switch between the current channel and the
channel you were watching immediately before.
- DTV MENU button
When this button is pressed, the DTV menu screen will be
displayed.
= DTV GUIDE button
When this button is pressed, the DTV guide screen will be
displayed.
~ DTV INFO button
When this button is pressed, information on DTV will be
displayed.
REMOTE CODE SET UP
73
<ARB1527>