Table of Contents
Advertisement
Handling and Maintenance
•
Do not subject the printer to excessive force, which may damage the
printer or cause paper jams.
•
Do not expose the printer to insecticides or other volatile substances.
Additionally, do not store the printer in contact with rubber, vinyl, or plastic
products over extended periods, which may cause deformation of the
casing.
•
Avoid condensation on the printer, which may happen when moving
the printer from cold to warm environments. Put the printer in a sealed
plastic bag and allow it to adjust to the new temperature before removing
the bag. If condensation forms, allow the printer to dry naturally at room
temperature before using again.
•
When the printer becomes dirty, wipe it with a soft, dry cloth.
•
If the air vent
(=
24) before wiping the dust away, to prevent dust from getting
inside and affecting print quality.
•
Never wipe the printer with solvents, such as benzene or thinner, or neutral
detergent, which may cause deformation or peeling of the casing.
(=
12) becomes dusty, remove the ink cassette
80
Hide quick links:
Advertisement
Table of Contents
