Picture Control - LG 19LE5300 Owner's Manual

PICTURE CONTROL

Edge Enhancer
xvYCC
Color Filter
Expert Pattern
Color Temperature
Color Management
System
OPC
110
Show clearer and distinctive yet natural edges in of the video.
*This feature is not available for all models.
This is the function to express richer color.
This feature represents rich color as much as conventional video signal.
This function is enabled in "Picture mode - Cinema, Expert" when xvYCC
signal is inputted through HDMI.
This is the function to filter the specific colors of the video.
You can use the RGB filter to set color saturation and hue accurately.
This is the pattern necessary for expert adjustment.
This function is enabled in "Picture mode - Expert" when you watch DTV.
Adjusts the overall color of the screen by changing the color of white.
a. Method : 2 Points
- Pattern: Inner, Outer
- Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 - +50.
LCD TV
b. Method : 10 Point IRE
- Pattern: Inner, Outer
- IRE (Institute of Radio Engineers) is the unit to display the size of the video
signal and can be set among 10, 20, 30 - 100. You can adjust Red, Green
or Blue according to each setting.
- Luminance: This function displays calculated luminance value for 2.2
gamma. You can input luminance value you want at 100 IRE, than the
target luminance value for 2.2 gamma is displayed at every 10 steps from
10 IRE to 90 IRE.
- Red/Green/Blue: The adjustment range is -50 - +50.
Plasma TV
b. Method : 20 Point IRE
- IRE (Institute of Radio Engineers) is the unit to display the size of the video
signal and can be set among 5, 10, 15 - 100 Plasma TV. You can adjust
Red, Green or Blue according to each setting.
- Red/Green/Blue: The adjustment range is -50 - +50.
As the tool used by the experts to make adjustments by using the test
patterns, this does not affect other colors but can be used to selectively
adjust the 6 color areas (Red/Green/Blue/Cyan/Mgt/Yellow).
Color difference may not be distinctive even when you make the adjust-
ments for the general video.
Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.
- Red/Green/Blue/Yellow/Cyan, Magenta Color: The adjustment range is
-30 - +30.
- Red/Green/Blue/Yellow/Cyan, Magenta Tint: The adjustment range is -30
- +30.
- This feature is disable in RGB-PC and HDMI-PC mode.
*This feature is not available for all models.
As the technology to reduce the power consumption while keeping the
same brightness, this has the effect of reducing power consumption,
improvement in contrast.