Sony WALKMAN NW-WM1A Help Manual page 90

If you are required to enter a passkey while pairing, check and enter the passkey for the Bluetooth device. For details on the
passkey for the Bluetooth device, refer to the manual of the device.
When the connection is established, [Connected] will appear in
From the library screen, select and play a track.
5
The sound will be output from the connected Bluetooth device.
To disconnect from a paired Bluetooth device
1.
While the Bluetooth device is connected, tap the menu items in the following order.
– [Settings] – [Connect to/Add Audio Device] ([Bluetooth]).
2.
Tap the name of the Bluetooth device from [Added Devices].
Hint
You can delete registered Bluetooth device. On the list of connectable devices in [Added Devices], tap
Then, select [Delete Device].
The passkey may also be called a "passcode", "PIN code", "PIN number", or "password".
The Walkman can stay connected to a Bluetooth device until you turn off the Bluetooth function. When you are not using the Bluetooth function,
turn off the Bluetooth function.
Note
The battery life becomes considerably shorter when the Bluetooth function is active.
You can pair the Walkman with a maximum of 7 devices. If the number of paired devices exceeds the maximum, the Walkman will delete the
oldest connected device.
If the pairing times out before it is finished, perform the procedure again starting from the Bluetooth connection screen.
There are some restrictions on sound output through a Bluetooth connection.
Even if you connect a pair of headphones to a headphone jack, sound will not be output from the headphones. Sound is output from the
Bluetooth device preferentially.
If sound is interrupted or skips during a Bluetooth connection, try the following.
Place the Walkman and the Bluetooth device closer together.
Select [SBC - Connection Preferred] by tapping the following menu items.
– [Settings] – [Audio Device Connection Settings] ([Bluetooth]) – [Wireless Playback Quality].
A Bluetooth connection is terminated automatically in the following cases:
The battery of the Walkman has run out.
The Walkman is turned off.
The Walkman is connected to a computer via USB (USB Mass Storage mode).
When there is an active Bluetooth connection, the sound quality settings are invalid.
.
beside the name of a Bluetooth device.
82