Table of Contents
Advertisement
Before a new model device is available for sale to the public,
it must be tested and certified to the FCC that it does not
exceed the SAR limit established by the FCC. Tests for each
model phone are performed in positions and locations (e.g. at
the ear and worn on the body) as required by the FCC. For
body-worn operation, this device has been tested and meets
FCC RF exposure guidelines when used with an accessory
that contains no metal and that positions the mobile device a
minimum of 1.5 cm from the body. Use of other accessories
may not ensure compliance with FCC RF exposure
guidelines. The FCC has granted an Equipment Authorization
for this mobile device with all reported SAR levels evaluated
as in compliance with the FCC RF exposure guidelines.
This device has a FCC ID number: A3LSMN910A
[Model Number: SM-N910A] and the specific SAR levels for
this device can be found at the following FCC website:
www.fcc.gov/oet/ea/.
The SAR information for this device can also be found on
Samsung's website: www.samsung.com/sar
SAR information on this and other model devices can be
accessed online on the FCC's website through
http://transition.fcc.gov/oet/rfsafety/sar.html. To find information
that pertains to a particular model, this site uses the device
FCC ID number which is usually printed somewhere on the
case of the device. Sometimes it may be necessary to
remove the battery pack to find the number. Once you have
the FCC ID number for a particular device, follow the
instructions on the website and it should provide values for
typical or maximum SAR for a particular device. Additional
SAR information can also be obtained at
www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-
telephones
Health and Safety Information
4
Advertisement
Table of Contents
