1·1. INTROOUCTlON.
1-2. The information contained in this Manual is for
the Installation, Operation, HP-IS Programming and
Service of the Hewlen·Packard Model 3456A Digital
Voltmeter.
NOTE
is
HP-IB
Hewlelt-Packard ' s implementation
488-1975,
of IEEE Std.
Interface for Programmable Instrumenta
tiOn . . .
1 - 3 . The Installation, Operating, and HP-IS Program
ming information in Ihis Manual is also contained in the
Operating Manual.
14. This section in the manual contains general infor
mation concerning the 3456A Digital Voltmeter. Includ
ed are instrument description, specifications, sup
plemental characteristics. instrument and manual iden
tification, options, accessories, and other information
on the instrument.
1·5. DESCRIPTION.
1-6. The Hewlett-Packard Model 3456A is a versatile
Digital Voltmeter with ac, dc, ohms, and various math
functions. This voltmeter is an excellent bench meter
and since it is remotely programmable it is an excep
tional system measurement device. Other features for
which you may have some good uses are the selection of
power line cycles integrated. the selection of certain
number of readings/trigger, seltling delay, ratio, and
other unique and useful functions.
1-7. The 3456A also employs a feature called AUTO
ZERO. This feature of the instrument is very useful for
good stability_ The internal reference device and
reference resistors are also selected for good accuracy
and stability. Another good feature is the TEST func
tion of the 3456A. With this function the instrument's
operation can be partially verified for correct operation
by the operator.
I·B.
SPECIFICATIONS.
1-9. Specifications of the 3456A are the performance
SECTION I
GENERAL INFORMATION
"Standard Digital
characteristics of the instrument which are warranted.
These specifications are listed in Table
performance standards or limits against which the in
strument can be tested. Included in Table 1-1 are also
some supplemental characteristics of the 3456A and
should be considered as additional and general informa
tion for you, the user. Because of the many operational
capablities of the 3456A, exercise care when determin
ing the instrument's specifications.
1-10. Any changes in the specifications due to manufac
turing changes. design, or traceability to the National
Bureau of Standards will be covered in a manual change
supplement or revised manual pages. The specifications
listed here supercede any previously published.
1·11. INSTRUMENT ANO MANUAl IOENTlFICATION.
1-12. Instrument identification is by a serial number
located on the rear panel of the instrument. Hewlett
Packard uses a two-part serial number. The first part
(prefix) identifies a series of instruments and the last
part (suffix) identifies a particular instrument within a
series. A letter between the prefix and suffix identifies
the country in which the 3456A is manufactured.
1-l3. This manual applies to instruments with serial
number indicated on the title page. Updating of the
manual is accomplished either by a change sheet or
revised pages.
1·14. OPTIONS.
1-15. The following options are available for use with
the 34S6A:
Option 350:
for 50 Hz Power Source
Option 360:
for 60 Hz Power Source
907:
Option
Front Handle Kit
9OB:
Option
Rack Mounting Kit
909:
Option
Front Handle and Rack Mounting Kit
Option 910:
Additional Set of Manuals
1·16. ACCESSORIES SUPPLIED.
1-17. The 34S6A is supplied with a 3/B amp, 250V fuse
for the 220V and 240V power line voltages.
I-I,
and are the
Rev B
1-1