Table of Contents
Advertisement
To ensure your child's safety, this product should be assembled by an
adult. Please ensure that the cot attachment clamp is securely locked
into position to avoid injury. Follow the instructions below carefully and
make sure that the final assembly is correct.
ASSEMBLY INSTRUCTIONS
1. Attach the three plush stars to the
mobile. Thread the cord from one of
the plush stars up through the hole in
the bottom of one of the leaves, then
thread it down through the hole on the
opposite side. Secure the loop over
the notch on the underside of the leaf.
Pull gently on the star to make sure it
is securely fastened. Follow the above
instructions for the remaining stars.
2. Attach the mobile to the bottom of the
electronic module. You will hear the
mobile click into place when inserted
correctly.
3. Attach the mobile support post to
cots and playpens with rails that are
between 1.02cm and 3.98cm wide.
Twist the blue sleeve to tighten the
clamp to the cot rail or playpen. Pull
slightly on the post to make sure the
clamp has been securely fastened.
Please check the post frequently to
ensure it is still secure.
7
Advertisement
Table of Contents
