HP 16500B User Manual page 4

Install measurement modules in any
slot
Single card analyzers, oscilloscopes,
and other options can go in any slot of
the HP 16500B or HP 16501A. You should
generally begin installing cards starting
with the bottom-most slot and working
up.
Some measurement modules have
multiple cards. A multiple-card module
must be installed into adjacent slots in
the same mainframe—that is, you
cannot install one card of the module
into the HP 16500B and the other into
the HP 16501A.
iv
Calibrate measurement modules after
installation
Some measurement modules are
sensitive to temperature and voltage
variations between different
mainframes. Thus, when you install
such a module in the mainframe, you
should calibrate it before using it to
ensure maximum measurement
precision and accuracy.
See the Service Guide for each
measurement module for installation
and calibration procedures.