Edit To Or From Another Video Recorder - JVC HR-XVC22UC Service Manual

Edit To Or From
Another Video
Recorder
A
TV receiver
Audio/video cable
AV mode
Recorder
B
TV receiver Recorder
Audio/video cable
AV mode
Player
Player Your unit
Audio/video
cable
Another recorder
Your unit
Audio/video
cable
Another recorder
You can use your unit as the source player or as the
recording deck.
Slide the TV/VCR/DVD switch to the right.
A
Make connections.
A When using your unit as the source player ...
... connect its AUDIO/VIDEO OUTPUT connectors to the
audio/video input connectors on another recorder.
B When using your unit as the recording deck ...
... connect its AUDIO/VIDEO input connectors to the
audio/video output connectors on another recorder.
B
Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
C
Set the input mode of recording deck.
With this video unit, press AUX (number key "0") and/or
CH to select "F-1".
● When using another recorder as the recording deck, refer to its
instruction manual.
D
Set the edit mode.
See "PICTURE CONTROL" on page 75.
E
Engage the Record Pause mode of the
recording deck.
Locate the point where you start recording, then engage
the Record Pause mode.
F
Start the source player.
Engage the Play mode of the source player.
G
Start the recording deck.
Engage the Record mode of the recording deck.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you select "EDIT" to dub tapes in step D, be sure to select
"NORM" after you finish dubbing the tapes.
● When you use this unit as the source player for editing, be sure to set
"SUPERIMPOSE" to "OFF" before starting. (
69
EN
pg. 75)