E196-4040/E196-4041/E196-4042/E196-4045/E196-4049 Main Controller Pcb Error; E198-401C/E198-401D/E198-401E Rtc Error; Location Of Connectors And Pin Arrangement; Main Controller Pcb - Canon iPF5000 series Service Manual

2. Replace the carriage PCB.
3. Replace the main controller PCB.

6.1.4.7 E196-4040/E196-4041/E196-4042/E196-4045/E196-4049 main controller PCB error

iPF5000
<Cause>
The main controller PCB is defective.
<Probable fault location>
Firmware or main controller PCB
<Countermeasure>
1. Upgrade the firmware.
2. Replace the main controller PCB.

6.1.4.8 E198-401C/E198-401D/E198-401E RTC error

iPF5000
<Cause>
The RTC of the main controller is not found.
The battery capacity is low.
<Probable fault location>
Lithium battery or main controller PCB.
<Countermeasure>
1. Start up the printer in the service mode, and then turn off the power.
2. Replace the lithium battery.
3. Replace the main controller.

6.2 Location of Connectors and Pin Arrangement

6.2.1 Main controller PCB

iPF5000
J801
Unused
J1001 J1001
J1201 J1201
J1401 J1401
J1402 J1402
J2601 J2601
J3402 J3402
J1101 J1101
J3701 J3701
J3801 J3801
J1801 J1801
J3401 J3401
J3501 J3501
J3202 J3202
J3601 J3601
J3301 J3301
J2703 J2703
J2502 J2502
F-6-1
T-6-1
J3411 J3411
J2101
J2101
J3101
J3101
J3201 J3201
J2801 J2801
J2501 J2501
J2901 J2901
J2702 J2702
J2701 J2701
J3001 J3001
Chapter 6
0012-9564
0012-9599
0013-3758
6-13