Setting The Timer Program Using The Video Plus+ System - Pioneer DVR-RT501-S Operating Instructions Manual

Recording
05
56
En
2H30301B_En_54_62
4
Press
sponding tuner channel number.
• Select a tuner channel number in the same way as you
selected the guide channel number.
• You can also select one of the external inputs (AV1, AV2 or
AV3) instead of a channel number if some channels are
received via an external receiver.
5
Repeat steps 3 – 4 to input the rest of the channel list.
6
Press
7
When you're done, press SETUP to exit.
Setting the timer program using the VIDEO
Plus+ system
The VIDEO Plus+ system simplifies timer recording so that you just enter a
PlusCode number (which you can find in your TV listings guide) for the
program you want to record, tell the recorder whether you want to record it
just once or regularly, and then select the DVD or the VCR for recording.
Note that for the VIDEO Plus+ system to work correctly, the clock must be
set to the right time and the guide channels must be setup. (See "Checking
the channel setup to use the VIDEO Plus+ system" on page 55.)
1
Press VIDEO Plus+.
If a PROGRAM FULL message appears then you'll need to
delete one of the existing timer programs before continuing.
Select a timer program from the list and press CANCEL.
2
Use the numeric keys to enter the PlusCode number.
56
to highlight TUNER CH NO., then enter the corre-
SETUP MENU
TIMER REC SET
CHANNEL SETUP
SYSTEM SETUP
TV/CATV SELECT CH TUNING GUIDE CH NO. 01
AV SETUP
AUTO CH MEMORY AUTO TUNING
TUNER CH NO.
- -
ADD/DELETE GUIDE CH SET
REC SETUP
OK
GUIDE CH SET
CHANNEL SETUP
OTHER
0 - 9
CANCEL
SELECT INPUT NO.
ENTER ENTER RETURN BACK SETUP
to highlight OK and press ENTER.
VIDEO Plus+
PlusCode#
1 - - - - - - - -
ONCE
TYPE
OK
0 - 9
SELECT INPUT NO. CANCEL
RETURN BACK
8/4/05, 19:24
PROCEED
PROCEED
PROCEED
DELETE
END
DELETE
VIDEO
END
Plus+