Installation - Pantala Trail PT-01BLS User Manual

3
4
5
6
Brightness: 100 lumens
Battery: 3.7V li-polymer 500mah
Charge Time: 2 hours
4. NSTALLATION
Mounting the Front Light:
1. Loosen the strap by unscrewing the adjusting nut
2. Ensure that the anti-wobble silicone that keeps the light mount
in a fixed position on the handlebar is correctly inserted in the
inner side of the mount
3. Position the light mount as desired on the handlebar
4. Tighten the mount by passing the strap through the slot inside
the adjusting nut and turning this clockwise
5. Attach the light to the mount by inserting the base of the light
in the top of the mount and rotating the light 90 degrees
Mounting the Rear Light:
1. Choose the size of silicone strap that fits in the bar where the
light will be mounted
2. Click the strap in one of the hooks on the rear light
3. Ensure that the silicone cover is correctly attached to the back
of the light
4. Press firmly the light on the seat post
5. Wrap around the seat post and click the lose end of the strap
to the free hook on the light
Alternatively, the rear light can be attached to other bars in the
bicycle frame or to helmets.
Up to 4 hours in Steady High mode
Up to 12 hours in Flash Slow mode
Up to 5.5 hours in Flash Fast mode
Up to 4.5 hours in Flash Strobe mode
6