Interface Icons; Installation; Charge The Battery - Zte WP750 User Manual

mode.
 Press the # Key to enter #.

Interface Icons

Icon Description
3G network Signal
strength
Alarm clock
Power Indicator

Installation

1. Charge the battery

Connect the lead of the charger to the power jack in the phone below.

Connect the charger to a standard AC socket.

 Meanwhile, power indicator in up-right corner of the display flops cyclically,
indicating the charging is going. In power-off mode while charging, the
display only shows the charging indicator. If the battery is completely flat in
storage or used up, it may take for a while before the power indicator
appears on the display or any calls can be made.
 When the power indicator on the screen stops flopping, the charging is
completed. The charging takes usually up to 4 hours. In the process of
charging, it is a normal phenomenon that the battery, phone and charger
get into hot accordingly.
 After the completion of charging, disconnect the charger from the phone
and AC socket.
Icon Description
GSM network Signal
strength
New Message(flop
when memory is full)
Mute
4