Using The Player With A Battery Pack - Pioneer PDV-20 Operating Instructions Manual

Using the player with
a battery pack
This player can be used with either the
PDV-BT20 battery pack (supplied with PDV-
LC20), or the PDV-BT25 high-capacity
battery pack (optional).
Please read the operating instructions that
come with your battery pack.
Attaching the battery pack
1 Line up the back of the player
with the back of the battery
pack.
2
Catches
2 Gently push the player down on
to the battery pack until you
hear it click into place.
Check that the battery is securely attached.
1
07 Additional Information
Recharging the battery pack
You can recharge the battery cpack whether
it is attached to the player or not.
The PDV-BT20 takes about 2.5 hours to
fully charge from empty; the PDV-BT25
takes about 5 hours.
1 Plug the power connector into
the DC IN jack on the rear of
the battery pack.
2 Plug the other end of the power
cord into a wall power outlet.
1
2
71
En