Motorola XT685 Manual page 37

—Enter a unique name for your
• Network SSID
hotspot and touch
—Select the type of security you want:
• Security
, , or
WEP WPA WPA2
Other users can access your Wi-Fi hotspot only if
they enter the correct password.
Note: Keep it secure. To protect your phone and
hotspot from unauthorized access, it is strongly
recommended that you set up hotspot
( is the most secure), including password.
WPA2
• Broadcast Channel
minimizes potential interference. You may need
to try different channels after your hotspot is
active for a time.
Touch when the settings are complete.
3 Save
When your Wi-Fi hotspot is active, other Wi-Fi enabled
devices can connect by entering your hotspot's
selecting a type, and entering the correct
Security
.
Password
Bluetooth TM handsfree devices
Turn Bluetooth power on or off
Touch Menu
Turn on:
the power
Bluetooth OFF
on.
.
Next
. Enter a unique password.
Security
—Select a channel that
SSID
> , then drag
System settings
switch to the right to turn it
Touch Menu
Turn off:
the
Bluetooth
off.
Note: To extend battery life, turn off Bluetooth power
when not in use.
Connect new Bluetooth devices
Note: This feature requires an optional accessory.
To connect with a new Bluetooth headset or other
device, you need to pair with it. You only need to do this
once for each device—to connect again, just turn on the
device.
1 Make sure the Bluetooth device you are pairing with
is in discoverable mode.
Note: Refer to the guide that came with the
Bluetooth device for details.
Touch Menu
2
,
Drag the
3 Bluetooth
to turn on and scan. If Bluetooth power is already on,
touch
SEARCH FOR DEVICES
Touch a device to connect.
4
If necessary, touch
5
(like ) to connect to the device. When the device
0000
is connected, the Bluetooth connected indicator
appears in the status bar.
>
System settings
power switch to the left to turn it
ON
>
System settings
power switch to the right
OFF
.
, or enter the device passkey
OK
, then drag
> .
Bluetooth
Wireless 35