Digital Audio Out Settings - Pioneer DV-400V-K Operating Instructions Manual

Initial Settings menu

Digital Audio Out settings

Setting
Digital Out
Dolby Digital Out
DTS Out
Linear PCM Out
(DV-600AV only)
96 kHz PCM Out
(DV-400V only)
MPEG Out
HDMI Out
Option
On
Off
Dolby Digital
Dolby Digital > PCM
DTS
DTS > PCM
Down Sample On
Down Sample Off
96kHz > 48kHz
96kHz
MPEG > PCM
MPEG
LPCM (2CH)
LPCM (5.1CH)
(DV-600AV only)
Auto
Auto (DSD)
(DV-600AV only)
Off
What it means
Digital audio is output from the digital outputs.
Note that there is no digital output when playing SACDs and
some DVD-Audio discs regardless of this setting.
No digital audio output.
Dolby Digital encoded digital audio is output when playing a
Dolby Digital DVD disc.
Dolby Digital audio is converted to PCM audio before being
output.
DTS encoded digital audio is output when playing a DTS disc.
(Noise will be output if your amplifier/receiver is not
compatible with DTS audio.)
No digital audio is output when playing a DTS disc.DTS audio
is converted to PCM audio before being output.
96kHz digital audio is converted to 48kHz for digital output.
Note that High sampling rate DVD-Audio discs (192kHz or
176.4kHz) automatically output down-sampled audio through
the digital outputs.
96kHz digital audio is output as is at 96kHz.
96 kHz digital audio is converted to 48 kHz for digital output.
96 kHz digital audio is output as is at 96 kHz.
MPEG encoded digital audio is converted to PCM audio for
digital output.
MPEG encoded digital audio is output as is.
Set if your monitor or device only accepts stereo input. On
this setting multichannel audio is downmixed to 2 channels
for stereo linear PCM output.
Set if the monitor or device you have connected using HDMI
is compatible with Liner PCM multi-channel formats. All
audio signals are output as linear PCM 5.1 format. (Use this
setting if you want to decode all streams by a player)
Dolby Digital, DTS and MPEG sources are processed
according to how they were encoded, and linear PCM
sources are heard as is. SACD sources are output as linear
PCM.
Set if you want to output DSD audio from an SACD source.
No digital audio output. Choose this option when you want to
change the Digital Audio Out, SACD Playback and
Speakers settings.
08
39
En