Connecting To An Av Receiver - Pioneer DV-400V-S Operating Instructions Manual

Connections
Important
• If you connect a TV that is not compatible
with a progressive scan signal and switch
the player to progressive, you will not be
able to see any picture at all. In this case,
switch everything off and reconnect using
the supplied video cable (see Easy
connections on page 11), then switch back
to Interlace (see below).
Switching the video output to interlace
using the front panel controls
Switch the player to standby then, using the
front panel controls, press
while pressing to switch the player back
to Interlace.
• If the player is connected using HDMI,
disconnect the HDMI cable before
resetting the player to interlace output. (If
left connected, the HDMI output
resolution will be reset to its default—see
Resetting the output resolution to the
default setting with HDMI connection on
page 15.)
STANDBY/ON
USB DVD/USB
STANDBY/
ON
STANDBY/ON
HDMI

Connecting to an AV receiver

To enjoy multichannel surround sound you
need to connect this player to an AV receiver
using the digital audio output.
In addition to a digital connection, we
recommend also connecting using the stereo
analog connection.
You'll probably also want to connect a video
output to your AV receiver. You can use any of
the video outputs available on this player (the
illustration shows a standard (composite)
connection).
1 Connect the DIGITAL AUDIO OUT
COAXIAL jack on this player to a coaxial
digital input on your AV receiver.
AV receiver
VIDEO OUT
P
B
P
R
HDMI OUT COMPONENT VIDEO OUT
Use a coaxial cable (similar to the supplied
video cable) to connect the DIGITAL AUDIO
OUT COAXIAL jack to a coaxial input on your
AV receiver.
2 Connect the analog AUDIO OUT L/R
and VIDEO OUT jacks on this player to a set
of analog audio/video inputs on your AV
receiver.
AV receiver
VIDEO OUT DIGITAL
AUDIO OUT
P
B
COAXIAL
P Y
R
HDMI OUT COMPONENT VIDEO OUT S-VIDEO OUT
You can use the S-video or component video
jacks to connect to the AV receiver if you
prefer.
To coaxial digital
input
AUDIO OUT
DIGITAL
AUDIO OUT
L
COAXIAL
R
Y
S-VIDEO OUT
To audio/video
inputs
AUDIO OUT
L
R
02
13
En