Pioneer AVIC-D1 Operation Manual page 119

Symptom
The navigation does not boot up or
CD playback is not possible.
No picture.
Audio skipping.
Rear display picture disappears.
Nothing is displayed and the touch
panel keys cannot use.
Cause
The disc is not inserted into the
appropriate slot.
The disc is inserted upside down.
The disc is dirty.
The disc is cracked or otherwise
damaged.
The files on the CD are an irregular
file format.
The CD format cannot be played
back.
The parking brake cord is not con-
nected or applied.
Parking brake interlock is activated.
The Navigation System is not firmly
secured.
The source without a video is
selected.
There was a problem with the rear
display or a faulty wiring connection,
for example.
Rear View is selected on the screen. Select view mode other than Rear
When the shift lever is in [R], displays
rear view camera images. (When
"NAVI" is selected in REAR DISP
menu.)
Operating the PICTURE ADJUST.
The setting for the rear view camera
is incorrect.
The shift lever was placed in [R]
when the rear view camera was not
connected.
The back light of the LCD panel is
turned off.
Action (See)
Eject the disc and insert the disc to
➞
appropriate slot.( About CD load-
ing slot and DVD-ROM loading slot
➞
Hardware Manual )
Insert the disc with the label upward.
Clean disc.
Insert a normal, round disc.
Check the file format. (Refer to
"Handing and care of the disc" on
the Hardware Manual.)
Replace disc. (Refer to "Handing and
care of the disc" on the Hardware
Manual.)
Connect a parking brake cord cor-
rectly, and apply the parking brake.
Park your vehicle in the safe place
and apply the parking brake.
➲ Parking brake interlock
Page 12
Secure the Navigation System firmly.
Switch the source with a video.
Check the rear display and its con-
nection.
View.
Select SOURCE in REAR DISP
menu.(or when you move the shift
lever other than [R] position, the
screen will be returned to the previ-
ous display.)
There is no picture on the rear dis-
play while the PICTURE ADJUST
is carried out.
Connect a rear view camera cor-
rectly.
Press AV button to return to the
source display and then select the
correct setting for CAMERA.
➲ About CAMERA setting
Page 102
Press the P.ADJ/B.LIGHT button
to turn on the back light.
➞
➞
117