Map Appearance - Lexus ES 300 Owner's Manual

Displaying POI
The map will shift so that the symbol is cen-
tered on the screen and overlaps with the
cursor . At this time, the distance from
your current position can be displayed on the
screen. The distance shown is as measured
in a straight line from the current vehicle
position to the POI.
The name of the point of interest and the
"Info."
switch on the screen are displayed
at the top of the screen. When you touch the
"Info."
switch on the screen, the informa-
tion such as the name and address, etc. are
displayed.
When your desired point of interest over-
"Enter"
laps with the cursor, touch the
switch. The screen changes and displays
the map location of the selected destina-
tion and route preference. (See "(a) En-
tering destination" on page 26.)
46
ES300_Navi_U (L/O 0208)

Map Appearance

You can select the single screen map or
the dual screen map. You can also
change the half of the screen to the guid-
ance screen by touching the map/guid-
ance switch while the map screen is dis-
played. You can choose one of two types
of guidance screens.
L00059
"MENU"
1. Touch the tab on the screen
to display the "Menu" screen and touch
"Map appearance"
the switch.
2003 ES300 Navigation from Aug. '02 Prod. (OM33592U)
L00094
2. The screen will change to the "Map ap-
pearance" screen and you can select the
map mode and the guidance mode.
Map mode
To display single map screen
To display dual map screen
Guidance mode
To display arrow screen
To display turn list screen
To turn off guidance screen