Pioneer PDR-W739 Operating Instructions Manual page 24

6 Finalizing and Erasing
Î
& #
$ ›
SKIP
SKIP
CLEAR
COMPACT DISC RECORDER/
MULTI-CD CHANGER
REMOTE CONTROL UNIT
Clearing skip IDs:
1 With the recorder stopped, press
SKIP.
The display indicates that you're in skip set/clear mode and
playback starts.
DISC 1
2
DISC
DISC 3
ALL FADER
L
–dB 40
X1
R
Use the 4 and ¢ buttons to
2
select the track you want to clear
the skip ID for.
The indicator lights if the track playing is marked
SKIP
with a skip ID.
3 Press SKIP CLEAR.
The indicator starts to blink.
SKIP
DISC 1
2
DISC
DISC 3
ALL FADER
L
–dB 40
X1
R
• If the track you selected in step 2 above didn't have a skip ID
set, playback jumps to the next track that does.
• Use the 4 and ¢ buttons if you want to change the
track again here.
• If there's no room left on the disc to clear a skip ID, the
display will show the message
24
COMPACT DISC RECORDER / MULTI-CD CHANGER
3
- COMPACT DISC MULTI CHANGER
TRK MIN SEC
CD-R
ANA
OVER
18 6 0
TRK
CD-R
SKIP ANA
OVER
18 6 0
.
SKIP FULL
◊ÛB¿ˆ≥≤/
4 Press SKIP CLEAR again to clear the
skip ID for the track playing.
The indicator disappears once the skip ID has been
SKIP
cleared.
• To cancel, press 7.
5 Clear further skip IDs by repeating
steps 2 to 4.
When you're finished, press 7 to stop
6
the disc and press 0 (CD-R side).
Until you eject the disc, the recorder stores the skip ID
information in its memory. On pressing 0, the recorder
writes the skip ID information onto the disc.
Be careful: don't switch off the unit before ejecting the
disc—you'll lose this sessions skip ID changes!
OPEN/CLOSE
0
COMPACT DISC DIGITAL RECORDER
REC/
REC MUTE
CD-R CONTROL
¡ ¢
4 1
7