Various Operations; To Program And Play Only The Discs You Want To Hear - Pioneer PD-F907 Operating Instructions Manual

VARIOUS OPERATIONS

÷ The remote control is the most convenient way to perform these
operations.
D
◊Û¿X/?≥
Î
'
FILE –TYME CD MECHANISM
To program and play only the discs
you want to hear (CUSTOM play)
This unit lets you program up to 100 of your favorite discs. For
example, you can store all the discs of your favorite artist, or some
other group of personal selections, and play only those discs.
You can even add other discs to the custom later on.
Operation example: Storing discs 3 and 12 in the CUSTOM II
file.
1
MODE
MODE
( )
÷ If some disc number appears, press CLEAR.
2
3
DISC
( )
÷ If you use DISC (–/+) to select a disc, it will be programmed
automatically after approximately 2 seconds.
3
DISC
SET
4
1 2
\
DISC
SET
DISC
(
)
12
<PRB1268>
En
MODE CLEAR
OPEN/ 6 7
41 ¡¢
CLOSE
1-BIT DLC
DIRECT LINER CONVERSION
During stop mode, press
MODE so that the CUSTOM
II indicator lights.
DISC TRACK MIN SEC
CUSTOM
I I
Use the digit buttons to
select disc.
DISC TRACK MIN SEC
CUSTOM
II
Press DISC SET.
DISC TRACK MIN SEC
CUSTOM
I I
Repeat steps 2 and 3 to
store other discs.
DISC TRACK MIN SEC
CUSTOM
I I
÷ The parenthesis ( ) show operations for the main unit.
MODE
Digit buttons
DISC (–/+)
DISC SET
6
To start playback
MODE
\
MODE
=
(
Checking the numbers of the stored discs.
Press TIME repeatedly (3 times) during stop mode so that
the display changes as shown below.
Press DISC(–/+). Each time you press DISC(–/+), a disc
number stored in the CUSTOM file is displayed. When all
the disc numbers have been displayed, the disc number
changes to a blank.
Erasing all the discs from the each CUSTOM
file.
Press MODE to choose CUSTOM, then press the CLEAR
button.
Note!!
You cannot change the discs stored in the CUSTOM file. Likewise,
you cannot erase just one disc from the CUSTOM file.
÷ Pressing DISC (–/+) during CUSTOM playback lets you choose
among other discs stored in the CUSTOM file.
÷ If you use the digit buttons and DISC SET on the remote control
during CUSTOM playback to choose a disc not stored in the
CUSTOM file, "
3 seconds.
÷ When a disc appointed to the CUSTOM file is not loaded in the
rack, " no dISC" is displayed for approximately 3 seconds, the
disc is erased from memory, and CUSTOM searches for the next
disc.
÷ The discs stored in the CUSTOM file will not be erased when you
turn off the power.
÷ Items stored in memory are saved for approximately 2 days, even
if the power cord is unplugged. However, this period may be
shortened somewhat, depending on the amount of memory used.
(Memory Back-Up Function).
÷ While the hood is open, DISC (–/+) cannot be used for CUSTOM
file entry.
D
POWER HI-LITE PREVIOUS BEST
REPEAT MODE PGM CLEAR
CLEAR
1 2 3 TIME
4 5 6
7 8 9
DISC TRACK
SET 0 SET
– +
DISC DISC (–/+)
1 ¡ 4 ¢
7 8 3
3
RANDOM
FILE-TYPE CD PLAYER
Î
REMOTE CONTROL UNIT
CU-P0090
3
Press MODE to select CUS-
TOM and press 3.
Playback starts from the lowest
disc No.
)
6
DISC TRACK
CUSTOM
II
no dISC" will be displayed for approximately
MIN SEC