Installing Battery And Connecting Parent Unit To Power - Motorola MBP482PU User Manual

Doc Title : Product Data – User's Guide
Model : MBP482
2.2

Installing battery and connecting parent unit to power

A rechargeable battery pack is supplied and should be fitted, so that the parent unit can be moved without losing
the link and picture from the baby unit(s). Charge the parent unit before you use it for the first time or when the
parent unit indicates that the battery is low
1. Slide off the battery compartment cover
2. Insert the plug of the battery pack into the jack inside the battery compartment, and fit the battery pack into the
compartment.
3. Replace the battery compartment cover, and pull out the stand (refer to section 2.3).
4. Insert the DC plug of the power adaptor with the bigger DC plug into the DC jack in the side of the parent unit.
5. Connect the other end of the power adaptor to a suitable power outlet.
6. The battery level indicator turns comes on
NOTE
Only use the provided power adaptor and battery pack. The parent unit can work with the power adaptor connected
but without a battery pack installed.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
R.00
10 of 17