Who Should Use Clear Rayz; Setup; Test For Light Sensitive Skin; Treatment Red Light / Blue Light - Quasar Clear Rayz Instruction Manual

WhO ShOULd USe / SeTUP / TeST / TReATMeNT

SeTUP

1. Insert the power plug into the bottom of the Clear Rayz tool.
2. Plug the power supply into the wall.
3. Press the On/Off switch to make sure tool is functional.
TeST FOR LIghT-SeNSITIVe SKIN
1. Place the red light side directly on your arm. Turn on the tool
and move it a sweeping motion in the area for the full cycle
(the tool will turn off automatically at the end of the cycle).
2. If you have pain or redness, you may have light-sensitive skin.
TReATMeNT RegIMeN
Treatment is one (1) day of Red (entire face) for 30 minutes and
one (1) day of bLUe (entire face) for 20 minutes per WeeK for
inflammatory acne
TReATMeNT STePS Red LIghT TheRAPY
1. Start by cleansing your face.
2. Push the button one time, the red light will come on.
3. Place the Clear Rayz tool gently on the skin in the first area
you are treating.
4. Move the tool in a slow circular or sweeping motion. Treat
within the area for 7 ½ minutes until the tool emits a soft
tone and the tool shuts off.
5. Turn the tool back on and repeat until all areas have been
treated.
6. The entire face treatment will be 30 minutes.
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
2
.