Table of Contents
Advertisement
SETTINGS
RM
With "RM ON" selected, the radio swit-
ches to the last selected radio programme
when fast forward winding or rewinding
the cassette.
PHONE OFF/ON/IN
The PHONE function enables you to se-
lect whether a telephone call is to be
heard via the loudspeakers when a mobile
telephone is connected.
• Select PHONE in the Setup menu.
"SETUP PHONE" and the current
setting "ON", "IN" or "OFF" appear in the
display.
• Press
or
of the rocker
the desired setting.
"PHONE OFF": no interpretation of the
telephone connection.
"PHONE ON": the car radio is automati-
cally muted on reception of a telephone
call.
"PHONE IN": the car radio is automatically
muted on reception of a teelephone call
and the conversation is heard via the loud-
speakers.
20
PHONE 0 ... 47
The PHONE function is used to set the
minimum telephone sound volume.
If the current volume is below the
"PHONE" setting, it will be boosted to this
setting if a telephone call is received.
• Select the PHONE menu item.
"SETUP PHONE" and the current setting
are shown in the display.
• Use the control knob/push button
select the desired setting. The setting
range is 00 – 47.
GALA
With increasing vehicle speed the noise
ß`
level inside the vehicle is increasing too.
to select
So far it has been necessary to manually
adjust the radio's volume to this noise
level.
Today, the GALA (Geschwindigkeits-
Abhängige-Lautstärke-Anpassung =
speed dependent volume control) function
automatically adjusts the volume accor-
ding to the vehicle speed.
It is possible to individually adjust this
speed dependent volume control.
• Select GALA in the Setup menu.
"SETUP GALA" and the current setting
are shown in the display.
• Use the control knob/push button
select the desired setting. The setting
range is 1 – 9.
1 = minimum effect
1
9 = maximum effect
to
Select the "NO" option to switch the
GALA function off.
Use the control knob/push button
adjust the basic volume (e.g. for different
radio stations or cassettes). The speed
dependent volume control continues to
operate automatically
CODE/SAFE
If "CODE" appears in the display, coding
is not activated.
If "SAFE" appears in the display, coding is
activated.
The way how to activate and deactivate
the coding is described on the the follow-
ing pages.
1
to
1
to
Hide quick links:
Advertisement
Table of Contents
