Specifications - Pioneer KEH-P4950 Operation Manual

Specifications

General
Power source .......... 14.4 V DC (10.8 – 15.1 V allowable)
Grounding system ........................................ Negative type
Max. current consumption ........................................ 8.5 A
Dimensions
(DIN) (chassis) ...... 178 (W) 50 (H) 155 (D) mm
(nose) ............ 188 (W) 58 (H) 20 (D) mm
(D) (chassis) ...... 178 (W) 50 (H) 160 (D) mm
(nose) ............ 170 (W) 48 (H) 15 (D) mm
Weight ...................................................................... 1.2 kg
Amplifier
Continuous power output is 17 W per channel min. into 4
ohms, both channels driven 50 to 15,000 Hz with no more
than 5% THD.
Maximum power output ...................................... 40 W 4
Load impedance .......................... 4
Preout maximum output
level/output impedance .......................... 2.2 V /1 kΩ
Equalizer (3 band equalizer)
(Low) .............................................................. ±12 dB
(Mid) .............................................................. ±12 dB
(High) ............................................................ ±12 dB
Loudness contour
(Low) .................. +3.5 dB (100 Hz), +3 dB (10 kHz)
(Mid).................. +10 dB (100 Hz), +6.5 dB (10 kHz)
(High).................. +11 dB (100 Hz), +11 dB (10 kHz)
Cassette player
Tape ........................ Compact cassette tape (C-30 – C-90)
Tape speed ........................................................ 4.8 cm/sec.
Fast forward/rewinding time .... Approx. 100 sec. for C-60
Wow & flutter .......................................... 0.09% (WRMS)
Frequency response ...................... 30 – 16,000 Hz (±3 dB)
Stereo separation ...................................................... 45 dB
Signal-to-noise ratio .................... 61 dB (IEC-A network)
FM tuner
Frequency range ...................................... 87.5 – 108 MHz
Usable sensitivity .................................................... 11 dBf
50 dB quieting sensitivity .... 16 dBf (1.7 V/75 , mono)
Signal-to-noise ratio ...................... 70 dB (IEC-A network)
Distortion .......................... 0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response ...................... 30 – 15,000 Hz (±3 dB)
Stereo separation .......................... 40 dB (at 65 dBf, 1 kHz)
AM tuner
Frequency range ........................ 531 – 1,602 kHz (9 kHz)
Usable sensitivity .............................. 18 V (S/N: 20 dB)
Selectivity .................................................. 50 dB (±9 kHz)
(4 – 8 allowable)
(volume: –30 dB)
Note:
• Specifications and the design are subject to possi-
(1.0 V/75 , mono, S/N: 30 dB)
ble modification without notice due to improve-
ments.
530 – 1,710 kHz (10 kHz)
50 dB (±10 kHz)
26