Table of Contents
Advertisement
PI Seek Function
The tuner searches for another frequency broadcasting the same programming.
"PI SEEK" appears on the display and the radio volume is muted during a PI Seek. The muting
is discontinued after completion of the PI Seek, whether or not the PI seek has succeeded.
If the PI Seek is unsuccessful, the tuner returns to the previous frequency.
Auto PI Seek
If the tuner fails to locate a suitable alternative frequency or if the broadcasting signal is too
weak for proper reception, the PI Seek will automatically start.
Preset Station PI Seek
When preset stations cannot be recalled, as when traveling long distances, the unit can be set
to perform PI Seek also during preset recall.
The default setting for PI Seek is OFF.
• Refer to "Initial Setting Menu" for details on how to switch this unit ON/OFF.
REG Function
When AF is used to retune the tuner automatically, REG (regional) limits the selection to
stations broadcasting regional programs.
• Regional programming and regional networks are organized differently depending on the country
(i.e., they may change according to the hour, state or broadcast area).
• The preset number may disappear on the display if the tuner tunes in a regional station which differs
from the originally set station.
Activating REG
The REG function can be turned ON independently for each FM band.
• Pressing the BAND button cancels the Function Menu.
"REG"
Hide quick links:
Advertisement
Table of Contents
