Related Manuals for Pioneer KEH-P2800R
Summary of Contents for Pioneer KEH-P2800R
-
Page 1: Operation Manual
Multi-CD control High power cassette player with RDS tuner Operation Manual KEH-P2830R KEH-P2800R... -
Page 2: Table Of Contents
REG Function ... 22 TA Function ... 23 PTY Function ... 25 Using the Cassette Player ... 28 Basic Operation of Cassette Player ... 28 Fast Forward/Rewind ... 29 Entering the Function Menu ... 29 Radio Intercept ... 30 Cassette Player and Care ... 31 Precaution ... -
Page 3: Installation
• Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up properly, and the unit and the system work properly. • Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. -
Page 4: Connection Diagram
This product conforms to new cord colors. 1. This unit 2. Rear output 3. Anntenna jack 4. Multi-CD player (sold separately) 5. Connect leads of the same color to each other. • Depending on the kind of vehicle, the function of 9 and 11 may be different. - Page 5 14. Speaker leads White: Front left White/black: Front left à Gray: Front right Gray/black: Front right Green: Rear left Green/black: Rear left Violet: Rear right Violet/black: Rear right 15. Fuse 16. Connecting cords with RCA pin plugs (sold separately). 17. Blue/white 18.
-
Page 6: Connecting The Units
• This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a recreational vehicle, truck, or bus, check the battery voltage. • To avoid shorts in the electrical system, be sure to disconnect the installation. -
Page 7: Key Finder
SOURCE button Programmable button +/– button DISP/Clock button Cassette door buttons Eject TA/AF button button Buttons 1 – 6 BAND button AUDIO button Function button PTY button %!# buttons Detach button... -
Page 8: Before Using This Product
Protect the product from moisture. If the battery is disconnected, the preset memory will be erased and must be reprogrammed. In Case of Trouble Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station. -
Page 9: Front Panel
Theft Protection The front panel of the main body is detachable to discourage theft. Detaching the front panel Take care not to grip it tightly or drop it. Replacing the Front Panel Precaution: • Never use force or grip the display tightly when removing or replacing the front panel. •... -
Page 10: Initial Setting Menu
With this menu, you can perform initial settings for the unit. Setting options cover everything from tuning steps for the tuner to auto PI seek ON/OFF switching. Entering the Initial Setting Menu Hold for 2 seconds To cancel the Initial Setting Menu, press the BAND button. •... -
Page 11: Switching The Auto Pi Seek
Switching the Auto PI Seek During Preset Station PI Seek operation, you can switch the Auto PI Seek function ON/OFF. (Refer to “PI Seek Function” on page 22.) Switching the AUX mode It is possible to use auxiliary (AUX) equipment with this product. Activate the AUX mode when using external equipment with this product. -
Page 12: Basic Operation
Switching Power On Each press of the SOURCE button selects the desired source in the following order: Tuner Tape Multi-CD player • In the following cases, the sound source will not change: *No Multi-CD player is connected to this unit. *No cassette tape is set in this unit. -
Page 13: Tuner Operation
Basic Operation of Tuner Each press changes the Source ... The program service name or frequency appears on the display. (" " indicator lights when a stereo station is selected.) This product’s tuner lets you select the tuning by changing the length of the time you press the button. -
Page 14: Af Function Switching
Hold for 1 second AF Function Switching This product’s AF function can be switched ON and OFF. AF should be switched OFF for normal tuning operations. Hold for 2 seconds To switch AF ON, repeat the preceding operation. • You can also switch the AF Function ON/OFF in the Function Menu. “AF”... -
Page 15: Entering The Function Menu
Entering the Function Menu In this menu you can select tuner functions. • REG, TA, PTY and AF are RDS functions. Refer to "Using RDS Function" for details and instructions on how to use these functions. Each press changes the Mode ... Each press of the Function button selects the mode in the following order: BSM + REG + LOCAL + TA + PTY SELECT + AF •... -
Page 16: Local Seek Tuning
Local Seek Tuning This mode selects only stations with especially strong signals. The sensitivity can be adjusted in 4 steps for FM and 2 steps for MW/LW. FM: LOCAL 1 , LOCAL 2 , LOCAL 3 , LOCAL 4 MW/LW: LOCAL 1 , LOCAL 2 •... -
Page 17: Bsm (Best Stations Memory)
BSM (Best Stations Memory) The BSM function stores stations in memory automatically. The stations with the strongest signals will be stored under buttons 1-6 and in order of their signal strength. • Pressing the BAND button cancels the Function Menu. Preset Memory The Preset Memory function stores stations in memory manually. -
Page 18: Recalling Preset Stations
Recalling Preset Stations There are two ways to recall preset stations. Direct Recall Sequential Recall Using the Programmable Button You can memorize Function Menu BSM, REG and LOCAL functions in the Programmable button. Initially, the BSM function is memorized in the Programmable button. Setting the Programmable Button Hold for 2 seconds... - Page 19 • Pressing the BAND button cancels the Programmable button setting mode. Using the Programmable Button The Programmable button operates in a different way depending on the function programmed (memorized). Function Press ——— ON/OFF ON/OFF Hold for 2 seconds ON/OFF ——— Entering the Local Seek Sensitivity mode...
-
Page 20: Using Rds Functions
What is RDS? RDS (Radio Data System) is a system for transmitting data along with FM programs. This data, which is inaudible, provides a variety of features such as: program service name, program type display, traffic announcement standby, automatic tuning and program type tuning, intended to aid radio listeners in tuning to a desired station. -
Page 21: Af Function
AF Function The AF (Alternative Frequencies search) function is used to search for other frequencies in the same network as the currently tuned station. It automatically retunes the receiver to another frequency in the network which is broadcasting a stronger signal when there are problems with reception of the currently tuned station or better reception is possible on a different frequency. -
Page 22: Pi Seek Function
PI Seek Function The tuner searches for another frequency broadcasting the same programming. "PI SEEK" appears on the display and the radio volume is muted during a PI Seek. The muting is discontinued after completion of the PI Seek, whether or not the PI seek has succeeded. If the PI Seek is unsuccessful, the tuner returns to the previous frequency. -
Page 23: Ta Function
• The system switches back to the original source following traffic announcement reception. • The TA function can be activated from the cassette player or multi-CD player mode if the tuner was last set to the FM band but not if it was last set to the MW/LW band. -
Page 24: Canceling Traffic Announcements
TP or EON-TP station. In the cassette player mode, the tuner automatically seeks out the TP station with the strongest signal in the current area 10 (or 30)* seconds after "TP" disappears from the display. -
Page 25: Pty Function
PTY Function The PTY function enables you to select stations by the type of programming they broadcast (PTY Search). It also provides automatic tuning to emergency broadcasts (PTY Alarm). • PTY code program types are as follows: 1. NEWS: News. 2. -
Page 26: Pty Search Setting Function
PTY Search Setting Function Hold for 2 seconds The "PTY" indicator lights and the name of a program type appears on the display for 5 seconds. • CURRENT sets desired PTY to the program type of the current station (only for RDS stations broadcasting PTY information). -
Page 27: Pty Search Function
PTY Search Function The tuner searches for a station broadcasting the desired PTY. • The program of some stations may differ from that indicated by the transmitted PTY. • If no station broadcasting the selected programming type is found, "NOT FOUND" is displayed for about 2 seconds, and the tuner returns to the original station. -
Page 28: Using The Cassette Player
Basic Operation of Cassette Player Same Time • The Tape function can be turned ON/OFF with the cassette tape remaining in this product. (See page 12.) -
Page 29: Fast Forward/Rewind
Fast Forward/Rewind Fast Forward While "<-->" is displayed, the system fast-forwards the cassette tape to the end of the current side. Rewind While "<-->" is displayed, the system rewinds the cassette tape to the beginning of the current side. Entering the Function Menu In this menu you can select Tape functions. -
Page 30: Radio Intercept
Radio Intercept (RI) This function allows you to listen to the radio during tape fast-forwarding/rewinding. • You can also switch the Radio Intercept mode ON/OFF by pressing the Programmable button. -
Page 31: Cassette Player And Care
Precaution About the Cassette Player • A loose or warped label on a cassette tape may interfere with the eject mechanism of the unit or cause the cassette to become jammed in the unit. Avoid using such tapes or remove such labels from the cassette before attempting use. -
Page 32: Audio Adjustment
This product can control one or more multi-CD players. Basic Operation of Multi-CD Players Each press changes the Source • The multi-CD player may perform a preparatory operation, such as verifying the presence of a disc or reading disc information, when the power is turned ON or a new disc is selected for playback. “READY”... -
Page 33: Disc Number Search
Switching the Multi-CD Player It is possible to connect up to three multi-CD players by means of a multiple installation adapter. When two or more multi-CD players are installed, their priorities must be specified. Follow the multi-CD player instructions carefully, and set the address switches properly. Disc Number Search Disc Number Search (for 6-Disc, 12-Disc types) You can select discs directly with the 1 to 6 buttons. -
Page 34: Other Functions
Track Search and Fast-forward/Reverse Besides Track Search convenience when searching for a desired track, this unit also lets you fast-forward and reverse through tracks to find a desired phrase or section of music. Track Search This feature enables you to advance or reverse track by track. Hold for half a second or less Fast-forward/Reverse This feature enables you to advance or reverse at high speed between tracks. -
Page 35: Specifications
Entering the Function Menu In this menu you can select Multi-CD Player functions. Each press changes the Mode ... Each press of the Function button selects the mode in the following order: REPEAT + RANDOM + ITS P + PAUSE •... - Page 36 Multi-CD Player Repeat Modes Multi-CD players offer four repeat modes: One-track Repeat, Disc Repeat, Multi-CD player Repeat and All Repeat. Multi-CD player Repeat is the default mode (normal play) when one or more multi-CD players is installed. Multi-CD player Repeat (“MCD” is displayed) + ALL Repeat (“ALL” is displayed) + One- track Repeat (“TRK”...
- Page 37 Multi-CD Player Random Play Random Play is available when one or more multi-CD players are in use. When Multi-CD Player Random Play is ON, you can combine it with Repeat Mode to operate as shown below. Switching the Repeat Mode switches Random Play OFF. •...
- Page 38 • Pressing the BAND button cancels the Detailed Setting Menu. ITS Playback ITS playback can be performed in any repeat mode. When ITS Play is ON, you can combine it with Repeat Mode to operate as shown below. If you change Repeat Mode into One-track Repeat, ITS Play will be turned OFF.
-
Page 39: Erasing Its Programs
Erasing ITS Programs ITS programs for up to 100 discs are stored permanently until you erase them. Erase a track program ITS is canceled and playback of the next ITS-programmed track begins. If there are no more programmed tracks in the current range, “ITS EMPTY” is displayed and normal playback resumes. -
Page 40: Disc Title Input
Disc Title Input You can input Titles up to 10 letters long for up to 100 discs. Using this function lets you easily search for and select a desired disc for play. (You can store ITS program and Disc Title data for up to 100 discs in memory.) To insert a space, select the flashing cursor. -
Page 41: Displaying Disc Titles
Displaying Disc Titles If no title has been input for a disc, “NO TITLE” flashes on the display for 8 seconds, after which the display becomes blank. Repeat the preceding operation to return to the normal display. Using the Programmable Button In the Function Menu, you can memorize the PAUSE, REPEAT, RANDOM, and ITS functions in the Programmable button. - Page 42 Using the Programmable Button The Programmable button operates in a different way depending on the function programmed (memorized). PAUSE REPEAT RANDOM ON/OFF Selecting the mode ON/OFF ITS Programming —–—— —–—— —–—— ON/OFF...
-
Page 43: Balance Adjustment
Selecting the Mode Each press changes the Mode ... Each press of the AUDIO button selects the mode in the following order: Fader/Balance + Bass + Treble + Loudness When audio modes are selected for adjustment, the setting returns to the normal display after 30 seconds. -
Page 44: Bass/Treble Adjustment
Bass/Treble Adjustment This product is equipped with two tone adjustment modes, the Bass Adjustment and Treble Adjustment modes. After adjustment use the BAND button to return to the normal display. The display shows "+6" – "-6". Loudness Adjustment (LOUD) The Loudness function compensates for deficiencies in the low and high sound ranges at low volume. - Page 45 Time Display/Setting Displaying the time Hold for 2 seconds The time display disappears temporarily when you perform another operation, but the time indication returns to the display after 25 seconds. Setting the Hours Hold for 2 seconds Setting the Minutes Hold for 2 seconds When you release the DISP/Clock button, the second count begins from 00 seconds.
-
Page 46: Using The Aux Mode
Synchronizing with the time announcement Hold for 2 seconds • The hour and minute can be advanced by pressing the respective buttons either consecutively or continuously. Using the AUX mode It is possible to use auxiliary (AUX) equipment with this product. Activate the AUX mode when using external equipment with this product. - Page 47 (Treble) ... ±12 dB (10 kHz) Loudness contour ... +10 dB (100 Hz), +7 dB (10 kHz) ...(volume: -30 dB) Cassette player Tape ... Compact cassette tape (C-30 – C-90) Tape speed ... 4.8 cm/sec. Fast forward/rewinding time ... Approx. 90 sec. for C-60 Wow &...
- Page 48 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: (905) 479-4411 PIONEER ELECTRONICS DE MEXICO, S.A. de C.V. San Lorenzo Num 1009 3er piso Desp. 302 Col. Del Valle, Mexico D.F. C.P. 03100 TEL: 5-688-52-90 <99B00F0R01>...