Memory Function - Mercedes-Benz S-Class Coupe Operator's Manual

pants – particularly children – could become
trapped. There is a risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat or steering
wheel. If somebody becomes trapped, imme-
diately release the memory function position
button. The adjustment process is stopped.
G
WARNING
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
The memory function can be used at any time,
even if the power supply is switched off.
Storing settings
With the memory function, you can store up to
three different settings, e.g. for three different
people.
The following settings are stored as a single
memory preset:
seat, backrest, head restraint position and
R
contour of the backrest in the lumbar region
active multicontour seat: side bolsters of the
R
backrest, shoulder of the backrest, contour of
the backrest, dynamic function level
seat heating: distribution of the heated sec-
R
tions of the seat cushion and backrest
driver's side: position of the exterior mirrors
R
on the driver's and front-passenger sides
position of the head-up display
R

Memory function

Adjust the seat accordingly (
X
On the driver's side, adjust the steering wheel
X
( page 98) and the exterior mirrors
Y
( page 100).
Y
Press memory button M and then press one of
X
the memory position buttons 1, 2 or 3 within
three seconds.
The settings are stored in the selected preset
position. A tone sounds when the settings
have been completed.
Calling up a stored setting
Press and hold the relevant memory position
X
button 1, 2 or 3 until the following compo-
nents are in the saved position:
Seat
R
Steering wheel
R
Exterior mirrors
R
Head-up Display
R
i
If you release the storage position button,
the seat, steering wheel and mirror setting
functions stop immediately. Adjustment of
the active multicontour seat or the 4-way lum-
bar support is still carried out.
103
page 92).
Y
Z