Samsung GT-E1172 Service Manual page 45

※ presetting 8960
(Tx setting)
※ After setting 8960 ( EGSM / DCS )
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
(Rx setting)
1. Active Cell
: select GSM or GPRS
2. Connetion Type
: select Auto(GSM), BLER(GPRS)
3. BCH Parameter
: select measuring band (DCS or EGSM)
4. Cell power
: -60dBm
1. After setting, prepare the call setup Display
2. Using an Originate Call, make a call.
3. Confirm the display "connected"
4. start the measuring
8-26
Level 3 Repair