LG DZ9300 Owner's Manual page 21

21
I n i t i a l S e t t i n g s
Initial Settings
(continued)
Password (Security Code)
You
can
create
or
change password.
1. Select Password
on
the LOCK
menu
then press B. The
"Change" is
highlighted
2. Press ENTER then the password window will appear.
3. To make
a new
password:
When the "New Password" section is
highlighted, enter
a
4-digit
password using the numbered buttons then press ENTER. Enter the
4-digit password again
to verify
when the "Confirm Password"
section is highlighted, then. The "OK" will be highlighted.
To
change
the
password:
When the "Old Password" section is
highlighted, enter
the
4-digit
password
you have created then press ENTER. The"New Password"
section will be highlighted. Enter
a new
4-digit password using the
numbered buttons then press ENTER. Enter the
new
4-digit security
password again
to
verify when the "Confirm Password" section is
highlighted.
The "OK" will be
highlighted.
4. Press SETUP
to
exit the
menu.
If you forget
your
Security Code
If you
forget
your
security
code you
can
clear it
using
the
following
steps:
1. Remove any disc from the unit and close the disc
tray.
See that "nodISC" is
displayed
on
the
display
window.
2. Press SETUP and
setup menu
apears
on
the TV
screen.
Use the numbered buttons
to enter
the
6-digit
number "210499".
See that "P-CLr" is
displayed
on
the
display
window.
3. Enter
a new
password
as
described above.
Area Code
Enter the code of the
area
whose standards
were
used
to rate
the DVD
video disc, based
on
the list in the reference chapter.
1. Select "Area Code"
on
the LOCK
menu
then press B.
2.
Select the first character
using v /
V buttons.
3. Shift the
cursor
using
B button and select the second character
using
v
/
V buttons then press
ENTER,
the
password
window will appear
4. Press ENTER,
the
password
window will appear.
5. If you have not entered
password yet:
When the "New Password" section is highlighted,
enter
a
4-digit
password using the numbered buttons then press ENTER. Enter the
4-digit security password again
to
verify
when the "Confirm
Password" section is
highlighted.
The "OK" will be
highlighted.
If you have entered
password already:
Enter
a
4-digit password
you have entered
using
the numbered
buttons. The "OK" will be highlighted.
6. Press ENTER
to
confirm your Area Code
selection,
then press SETUP
to
exit the
menu.