Offset/Gain Setting Operation - Mitsubishi Electric Q66DA-G User Manual

Channel isolated digital-analog converter module
Hide thumbs Also See for Q66DA-G:
Table of Contents

Advertisement

5
UTILITY PACKAGE (GX Configurator-DA)
5.6.2

Offset/gain setting operation

Perform the offset/gain setting operation in the following sequence.
(1) Switch to the offset/gain setting screen
Perform the operation in Section5.6.1 to display the offset/gain setting screen.
At this point, a dialog box to confirm the transition of Q66DA-G's operation mode (nor-
mal mode -> offset/gain setting mode) is displayed. Click the
the offset/gain setting mode.
(2) Specify a channel
Specify the target channel of offset setting or gain setting on the channel No. combo
box.
(3) Specify offset/gain setting
Specify either offset setting or gain setting on the channel specified on the channel
No. combo box using the radio button.
(4) Specify the user range setting
Specify a user range used for the offset/gain setting of each channel on the combo
box.
5.6 Monitoring/Test
5.6.2 Offset/gain setting operation
1
2
button to transit to
3
4
5
6
7
8
5
- 23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents