Samsung GT-E1360M Service Manual page 58

Disassembly and Assembly Instructions
1) Set Main KEYPAD on the Front.
※ Caution
1) Be careful not to make scratch and molding
damage!
1) Assemble the PBA concordantly with screw
boss and assemble mic.
※ Caution
1) Be careful not to make scratch and molding
damage!
2) Be careful of MIC rubber that come off
SAMSUNG Proprietary-Contents may change without notice
9
11
This Document can not be used without Samsung's authorization
1) Drop slide ASS'Y to line of picture until Slide
FPCB length is prolonged
- Assemble the SLIDE FPCB to the MAIN PBA.
※ Caution
1) Be careful not to make scratch and molding
damage!
2) Be care of Slide FPCB
HOOKER
ROCKING
POINT
1) Assemble the Rear on the PCB.
※ Caution
1) Take care so as not to be if GAP breaks out.
11-7
10
12
.