Advertisement
This electrical vacuum cleaner is equipped with a pipe, 2 telescopic tubes, a multi-surface roller brush and 1
double function end piece (nozzle and pivot brush). It does not require a bag and has a power of 800 watts.
With its easy-to-handle design and 360° pivot function, it is uses an HEPA filter to neutralise up to 99% of
dirt, bacteria and pollen (of 0.3μm diameter and above).
NOTE: Please read the instructions carefully before using the device and retain for future
SPECIFIC RECOMMENDATIONS
Before plugging in the device, check that the voltage indicated on the device corresponds to the voltage of the local power
supply.
Never use the device if the plug, power cable or device itself is damaged.
If the power cable is damaged, it must be replaced by a qualified technician to avoid the risk of accidents occurring.
Keep the device out of the reach of children. This device is not a toy.
For domestic use only. Do not use outside.
Never vacuum water, liquids, flammable substances or hot ashes.
Never direct the pipe, tube or other accessory towards the eyes or ears.
Never vacuum large objects as they can block the passage of air in the tubes or pipe.
Never use the device without protection filters as you could damage the motor and reduce the lifespan of the device.
Use only with the accessories provided with the device.
Do not unplug the device by pulling on the power cable.
Ensure that the device is always unplugged when not in use and before emptying.
This appliance is not designed to be used by anyone (including children) with less than normal physical, sensory or mental
capacities, or by those with no experience or understanding of electrical devices, until and unless they have been
supervised or instructed in its use by someone responsible for their safety.
DESCRIPTION OF ITEM (Pic 01)
1. Pipe connector
2. Dust compartment opener
3. Stop/start button
4. Transport handle
5. Power cable compartment
6.
Back wheels
BEFORE USE (Pic 01)
1. Insert the pipe (10) into the pipe connector hole (1).
Note: To remove the tube, press the connector buttons (11) and remove the pipe.
2. Insert the telescopic tubes (8) into the other end of the pipe (10).
3.
Attach the required accessory: the flat end piece (7) or the multi-surface brush (9).
USING THE DEVICE
1. Remove the power cable from its compartment (5) and plug into a power socket.
2. Switch on the device by pressing the stop/start button (3).
3. You can adjust the suction power using the adjuster (12) on the pipe handle.
DESCRIPTION OF THE 2 ACCESSOIRES
1. Brush (9):
This brush can be used on various surfaces:
To clean hard surfaces (floors, tiling,...), activate brushes by turning the switch to position
To clean soft surfaces (carpets), de-activate brushes by turning the switch to position
2. Double function end piece – nozzle and pivot brush (7):
The size of the end piece means that it can be used to clean with or without the brushes in tricky places (windows,
radiators). You can also fix the end piece directly onto the pipe handle (10) without the telescopic tubes (8).
Instructions for Use
reference.
7. Tool Caddy, Dusting Brush, Upholstery Tool & Crevice Tool
8. Telescopic tubes
9. Multi-surface brush
10. Pipe
11. Connector buttons
12. Power control adjuster
3
Advertisement
